Reviver Pro Laser
Admired by users. Acclaimed by innovators.
4.6 average rating
One Wavelength. Precisely Placed.
A single 940 nm near-infrared beam, concentrated into a head you hold exactly where you want it. Around the eyes. Along the jaw. Across the forehead. With consistent use, skin looks smoother and more refreshed.
How It Works
940 nm is near-infrared: past the red end of what the eye can see, and the part of the spectrum that travels furthest into skin. The Pro Laser head narrows it into a focused beam, so you work one small area at a time instead of flooding the whole face. With consistent use, fine lines look softened and texture looks smoother.
It only works when it is touching you. The beam will not fire unless the contact ring sits flush against skin. Lift it, tilt it, or set it down, and it stops immediately. There is no mode in which the beam is exposed, and nothing to switch on. The safety is not a warning label — it is the way the device works.
Designed Around You
A single focused wavelength, held steady over one area at a time. With consistent use, texture looks smoother and more even.
For a brighter, more rested-looking finish, worked slowly and consistently.
Near-infrared at 940 nm, worked slowly across the areas that show age first. With consistent use, fine lines look softened.
The beam is narrow, so it is easy to place exactly along the jaw, the cheeks and the neck.
Where to Use It
Around the Eyes
Forehead
Nose
Chin
Neck
Cheek
Cordless by Design
Reviver Pro Laser is cordless and small enough to hold steady through a whole session. One focused head, a fine serum mist, and a base that keeps it charged and ready. Small enough for a carry-on.
The Ampoules
The mister works with four ampoule formulas, one for each kind of day:
- Repairing — for skin that needs a little extra care
- Hydrating & Glowing — moisture, and a fresh-looking finish
- Lifting & Toning — for a firmer-looking finish
- Brightening — for tone that looks more even
Six Heads. One Device.
Reviver Pro Laser ships with the Pro Laser 940 nm head. Five more fit the same body and attach magnetically:
- IR + Red and Topical Heat — 630 nm red, 850 nm infrared and warmth to 42 °C
- IR + Blue Light — 415 nm, for skin that looks clearer and calmer
- Microneedling — 0.5 mm, for the look of texture
- EMS and Blue LED — blue light, for a fresher-looking finish
- Pain Relief — 40 LEDs and steady warmth for tired muscles and joints
What's in the Box
Package
Reviver Body
Charging Base
Pro Laser 940 nm Head
User Manual
Charging Cable
Everything Included
Instruction Video
How to Use
What Users Report
Self-reported results from a Spacetouch customer survey. Individual experience varies.
Reviver Pro Laser Details
One head. One wavelength. 940 nm near-infrared, focused into a narrow beam you place by hand. A 3 ml ampoule of serum sits inside the body and mists onto skin as you work. Cordless, and light enough to hold through a whole session.
Technologies & Features
- Skin-contact sensor. The laser emits only while the contact ring is flush against skin. Break contact and emission stops in the same moment — continuous, automatic, and impossible to forget.
- Pro Laser head — 940 nm. One near-infrared wavelength, focused into a narrow beam for precise placement.
- Magnetic heads. Every head seats on pogo pins and swaps in a second, with no tools and no cables. Six heads fit the same Reviver body and attach magnetically: IR + Red and Topical Heat, IR + Blue Light, Microneedling, EMS and Blue LED, Pro Laser 940 nm, and Pain Relief.
- Nano serum mist. A 3 ml ampoule sits inside the body, so serum and light arrive together instead of one after the other. Until now that meant two steps and two devices.
- Cordless. A 1200 mAh battery, charged on its own base in two to three hours.
Specifications
In the box
Reviver body · charging base · Pro Laser 940 nm head · charging cable
Light
Pro Laser head — 940 nm near-infrared
Safety
Skin-contact interlock — emission permitted only while the ring is in full contact with skin. Continuous and automatic.
Emission
Coherent near-infrared, single focused point
Rated power
Base unit 5 W · Pro Laser head 3.5 W
Rated electrical power — what the device is built to draw, not the amount of light that reaches your skin.
Battery
1200 mAh · 5 V · 2–3 hours to charge
Ampoule chamber
3 ml
Size
75 × 69 × 198 mm
Warranty
Lifetime manufacturer's warranty
Other heads
Six heads fit the same Reviver body and attach magnetically: IR + Red and Topical Heat, IR + Blue Light, Microneedling, EMS and Blue LED, Pro Laser 940 nm, and Pain Relief. Sold separately.
Warranty
All Spacetouch devices are backed by a Lifetime Manufacturer's Warranty covering the replacement of any manufacturing or battery defects. Shipping costs for replacement devices are not covered. To activate this warranty, please register your device within 7 days of first use here.
For complete protection, Spacetouch Care+ plans (available for 2, 3, or 5 years) also cover lost and stolen devices and any kind of defect or accidental damage. To learn more or enroll in Care+, please click here.
Frequently Asked Questions
Answers to the questions we are asked most about Reviver Pro Laser. For anything else, our Help Center is here.
What is Reviver Pro Laser for?
The appearance of fine lines, and a smoother, more refreshed-looking finish — worked one small area at a time.
Is it okay to use thick serum?
Thick serums are not ideal for direct use. Dilute them with purified water at a ratio of 1 part serum to 10 parts water for optimal results.
Do I need eye protection?
The device is built so the question largely answers itself. The laser will not emit unless the contact ring is flush against your skin, so there is no ordinary way to direct the beam toward your eyes.
As a general habit, don't attempt to look into the head, and keep it off the eye itself when working the surrounding area. Protective glasses are available in Accessories if you prefer them.
How does the contact sensor work?
A sensor in the contact ring detects skin. The laser is permitted to emit only while that contact is unbroken — lift the head, tilt it off the surface, or set it down, and emission stops in the same moment.
It is not a setting, and there is no way to switch it off. Most devices ask you to be careful. This one removes the opportunity.
How can I file a warranty claim?
Kindly go to https://spacetouch.com/pages/warranty-claim
How powerful is Reviver Pro Laser?
The base unit is rated at 5 W and the Pro Laser head at 3.5 W — the electrical draw.
The Pro Laser works differently from the LED heads. Instead of spreading light across a window, it concentrates a single coherent 940 nm beam into one point of contact. Comparing its wattage to an LED head is comparing two different instruments.
For reference, the LED heads deliver 12.4 mW/cm² (IR + Blue) and 9.2 mW/cm² (IR + Red) across 8.55 cm². The laser's certified output figure is with the manufacturer and will be published here once confirmed.
Which wavelength does it use?
Pro Laser head — 940 nm near-infrared.
Across the rest of the system: IR + Red and Topical Heat 630 nm + 850 nm · IR + Blue Light 415 nm · Pain Relief 660, 810 and 850 nm across 40 LEDs. Blue works at the surface. Red and near-infrared reach further.
Is more power better?
No — and it's one of the most misunderstood things about light therapy.
The skin's response is what researchers call biphasic. Too little light does nothing. Too much doesn't do more — it does less. Published studies show cell activity rising to a peak at a modest dose, then falling away as the dose climbs higher.
One study makes the point neatly: a lower intensity delivered over a longer time outperformed a higher intensity over a shorter one, even though the total energy was identical. Intensity and time aren't interchangeable.
Which is why we design around a considered session rather than the largest number we could print on a box.
